Chicago-electric Wire Feed Welder MIG 170 Bedienungsanleitung PDF herunterladen

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2011 by Harbor Freight Tools

this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools. Diagrams

within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described

herein. Tools required for assembly and service may not be included.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-800-444-3353 as soon as possible.

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual

near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and

the receipt in a safe and dry place for future reference.

Owner’s Manual & Safety Instructions

1 2 3 4 5 6 ... 31 32

Inhaltsverzeichnis

Seite 1

Visit our website at: http://www.harborfreight.comEmail our technical support at: [email protected] this material before using this product.

Seite 2 - IMPORTANT SAFETY INFORMATION

Page 10 For technical questions, please call 1-800-444-3353. SKU 68885 6a. Flux Core (Gas-less) Wire Setup: Remove the two Knobs securing the

Seite 3 - Arc Ray Safety

Page 11For technical questions, please call 1-800-444-3353.SKU 68885 7. Turn the Feed Tensioner knob counterclockwise to loosen it enough to

Seite 4 - Fire Safety

Page 12 For technical questions, please call 1-800-444-3353. SKU 68885 IMPORTANT:Securely hold onto the end of the welding wire and keep tensi

Seite 5 - SAVE THESE INSTRUCTIONS

Page 13For technical questions, please call 1-800-444-3353.SKU 68885 WARNINGThe following steps require applying power to the welder with the

Seite 6 - Replacement Cords

Page 14 For technical questions, please call 1-800-444-3353. SKU 68885 17. To check the wire’s drive tension, feed the wire against a piece o

Seite 7

Page 15For technical questions, please call 1-800-444-3353.SKU 68885 Basic WeldingRead the ENTIRE IMPORTANT SAFETY INFORMATION section at the

Seite 8 - Plug Attachment

Page 16 For technical questions, please call 1-800-444-3353. SKU 68885 Control Panel LayoutOverload Indicator: This lights up if duty cycle

Seite 9 - Wire Spool Installation

Page 17For technical questions, please call 1-800-444-3353.SKU 68885 Avoid damage to the Welder by not welding for more than the prescribed du

Seite 10

Page 18 For technical questions, please call 1-800-444-3353. SKU 68885 Metal ThicknessFlux Weld SettingsDCEN PolarityNO GASMaterial BeingWeld

Seite 11

Page 19For technical questions, please call 1-800-444-3353.SKU 68885 1. Make practice welds on pieces of scrap the same thickness as your int

Seite 12 - IMPORTANT:

Page 2 For technical questions, please call 1-800-444-3353. SKU 68885 Table of ContentsSafety ...

Seite 13 - IMPORTANT

Page 20 For technical questions, please call 1-800-444-3353. SKU 68885 DANGER! TO PREVENT DEATH FROM ASPHYXIATION: Do not open gas without p

Seite 14 - WIRE FEED WELDER

Page 21For technical questions, please call 1-800-444-3353.SKU 68885 1. Press (and hold) Trigger and contact area to be welded with electrode

Seite 15 - Practice your welding

Page 22 For technical questions, please call 1-800-444-3353. SKU 68885 Note: If Welder is used too long, the amber Overload Indicator will li

Seite 16 - Control Panel Layout

Page 23For technical questions, please call 1-800-444-3353.SKU 68885 Welding TipsA good way to test welding technique is to examine a weld’s a

Seite 17 - Duty Cycle (Duration of Use)

Page 24 For technical questions, please call 1-800-444-3353. SKU 68885 EXCESS PENETRATION OR BURN-THROUGHPROPER PENETRATIONINADEQUATE PENETRAT

Seite 18 - MIG Weld Settings

Page 25For technical questions, please call 1-800-444-3353.SKU 68885 EXCESS PENETRATION OR BURN-THROUGHWeld droops on top and underneath, or f

Seite 19 - Setting Up The Weld

Page 26 For technical questions, please call 1-800-444-3353. SKU 68885 Burn-ThroughBase material melts away, leaving a hole in the weld.POSSI

Seite 20 - WIRE FEED SPEED

Page 27For technical questions, please call 1-800-444-3353.SKU 68885 MaintenanceTO PREVENT SERIOUS INJURY, FIRE AND BURNS: Unplug the welder,

Seite 21 - Basic Welding Technique

Page 28 For technical questions, please call 1-800-444-3353. SKU 68885 TroubleshootingIMPORTANT!Be CERTAIN to shut off the Welder, disconnect

Seite 22

Page 29For technical questions, please call 1-800-444-3353.SKU 68885 Troubleshooting (continued)IMPORTANT!Be CERTAIN to shut off the Welder, d

Seite 23 - Strike Test

Page 3For technical questions, please call 1-800-444-3353.SKU 68885 Fume and Gas SafetyFUMES AND GASES can be hazardous to your health.1. Exp

Seite 24 - Example Weld Diagrams

Page 30 For technical questions, please call 1-800-444-3353. SKU 68885 Parts List and DiagramsWiring DiagramGas/GaslessGaslessWelding TorchGas

Seite 25 - Coat of Slag Over Weld

Page 31For technical questions, please call 1-800-444-3353.SKU 68885 Assembly Diagram1 2 3 4 5 6 7 8 9 10 11 12 13 143231302928272625151617181

Seite 26 - Excessive Spatter

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353Limited 90 Day WarrantyHarbor Freight Tools Co. makes every effort t

Seite 27 - Maintenance

Page 4 For technical questions, please call 1-800-444-3353. SKU 68885 Electrical SafetyELECTRIC SHOCK can KILL.1. Turn off, disconnect power,

Seite 28 - Weak Arc strength

Page 5For technical questions, please call 1-800-444-3353.SKU 68885 Welder use and care1. Do not use the welder if the switch does not turn i

Seite 29 - IMPORTANT!

Page 6 For technical questions, please call 1-800-444-3353. SKU 68885 GroundingTO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING W

Seite 30 - Parts List

Page 7For technical questions, please call 1-800-444-3353.SKU 68885 SymbologyWire Feed (Speed)Workpiece Ground CableTorch CableOverheat Shutdo

Seite 31 - Assembly Diagram

Page 8 For technical questions, please call 1-800-444-3353. SKU 68885 1. Attach the handle to the Face Shield by lining up the two rectangula

Seite 32 - Limited 90 Day Warranty

Page 9For technical questions, please call 1-800-444-3353.SKU 68885 Wire Spool Installation1. Turn the welder OFF and unplug it before procee

Kommentare zu diesen Handbüchern

Keine Kommentare

Chicago-electric Wire Feed Welder MIG 170 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Chicago-electric Wire Feed Welder MIG 170 herunter. Chicago Electric Wire Feed Welder MIG 170 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Chicago-electric Wire Feed Welder MIG 170